30 minute technician training- Ebtron, Onicon, Danfoss, TSI, Sage, MSA, Acutherm

/

Hi- Tom, Rick, and I have been working on a series of 30 minute Zoom presentations for technicians— basically the bare minimum that you need to know to setup our equipment. They are different depending on the product but they typically include the following:

20201022_125932.jpg

  1. Basic Installation

  2. Initial setup

  3. Analog output/input scaling

  4. Communications

  5. Basic Troubleshooting

We tried to keep them to 30 minutes, and setup so you can watch them over your phone or laptop. I still like to do these live— we may record them in the future but live is easier to make sure we get your questions answered.

Don’t let the fact that they are live keep you from scheduling a session! We literally have nothing better to do than train customers on our equipment, and we will absolutely run this for 1 person no problem (you don’t need a group).

Training is always free for any customers or owners, just let us know. We have these already setup for Ebtron, Danfoss, Onicon, TSI, Sage, MSA, and Acutherm. The other equipment is coming so let us know if you need something! TimH